Table of Contents
Advertisement
Command Reference
E4981A SCPI Commands
If the comparator function is disabled (OFF has been specified with the
:CALCulate1:COMParator[:STATe]
{numeric1}, {numeric2}, and {numeric3}, are read out.
{numeric 1}, {numeric 2}, {numeric 3}, and {numeric 4} are as follows:
{numeric 1},{numeric 2},{numeric 3},{numeric 4}<newline><^END>
Query response
The query response is the same as that of the
refer to the description of :FETCh?.
Related commands
:FETCh?
*TRG
:INITiate[:IMMediate]
:TRIGger[:SEQ1]:SOURce
:FORMat[:DATA]
Equivalent key
No equivalent key is available on the front panel.
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
{numeric 1}: Measurement status (one of the integers between 0 and 3
listed below)
0: No error
1: Detection of overload (OVLD)
2: Detection of Low C or No Contact (See
:FORMat:STATus:EXTension
{numeric 2}: Measured value of the primary parameter
{numeric 3}: Measured value of the secondary parameter
{numeric 4}: Comparator sorting result (an integer between 0 and 11
listed below)
0: Sorted into OUT_OF_BINS.
1: Sorted into BIN1.
2: Sorted into BIN2.
3: Sorted into BIN3.
4: Sorted into BIN4.
5: Sorted into BIN5.
6: Sorted into BIN6.
7: Sorted into BIN7.
8: Sorted into BIN8.
9: Sorted into BIN9.
10: Sorted into AUX_BIN.
11: OVLD (Overload) or NC (No Contact) [sorting not possible]
on page 220
on page 163
on page 225
command), only three data items,
on page
224)
:FETCh?
on page 228
on page 305
command. For details,
231
Advertisement
Table of Contents
