Data:feed:control:buf2[:State] - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:DATA:FEED:CONTrol:BUF2[:STATe]

Syntax :DATA:FEED:CONTrol:BUF2[:STATe] {NEVer|ALWays}
:DATA:FEED:CONTrol:BUF2[:STATe]?
Description Determines whether the measurement data is fed into data buffer 2 never or
always.
Parameters
ALWays
NEVer (initial
value)
Query response {ALW|NEV}<newline><^END>
Related commands
:DATA:FEED:BUF1
:DATA:POINts:BUF1
Equivalent key [Save/Recall] - CATALOG - SAVE DATA - START LOG
sequence
198
Description
Feeds the measurement data into the data buffer 2 specified with
BUF2 each time a measurement is performed.
Does not feed the measurement data into the data buffer 2
specified with BUF2.
on page 195
on page 202
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter