Table of Contents
Advertisement
Command Reference
Notational Conventions in this Command Reference
The definitions of symbols used in the syntax are as follows.
<>
[]
{}
For example, ":APER SHOR", ":SENS:FIMP:APER:MODE LONG," and so on are
valid for the syntax given below.
Syntax
[:SENSe][:FIMPedance]:APERture[:MODE] {SHORt|MEDium|LONG}
Parameters
A part with heading "Parameters" describes parameters necessary for sending
the command. When a parameter is a value type or a string type enclosed with
<>, its description, allowable setup range, Initial (Preset) value, and so on are
given; when a parameter is a selection type enclosed by {}, the description of
each selection item is given.
Equivalent key
A part with the heading "Equivalent key" shows the operational procedure for
the front panel keys. An equivalent key has the same effect as a certain
command.
[Key]
[Key]
156
Characters enclosed in this pair of symbols are necessary
parameters when sending a command.
A part enclosed in these parentheses can be omitted.
A part enclosed in these parentheses indicates that you must
select one of the items in this part. Individual items are
separated by a vertical bar (|).
Indicates that you press the key named Key.
-
Indicates a series of key operations in which you press
ITEM
select the item called ITEM (softkey or field name) on the
displayed menu using the cursor keys, and then press the
softkey.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
,
[Key]
Advertisement
Table of Contents
