Calculate1:Math:expression:catalog; Calculate1:Math:expression:name - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate1:MATH:EXPRession:CATalog?

Syntax :CALCulate1:MATH:EXPRession:CATalog?
Description Reads out available parameters used when executing the command to specify
the expression of the primary parameter in the deviation measurement mode
(the
is always DEV,PCNT. (Query only)
Query response {DEV,PCNT}<newline><^END> (fixed)
Related commands

:CALCulate1:MATH:EXPRession:NAME

Equivalent key No equivalent key is available on the front panel.
sequence
:CALCulate1:MATH:EXPRession:NAME
Syntax :CALCulate1:MATH:EXPRession:NAME {DEV|PCNT}
:CALCulate1:MATH:EXPRession:NAME?
Description Specifies the expression of the primary parameter used when displaying the
measurement result in the deviation measurement mode.
Parameters
DEV
(initial value)
PCNT
Query response {DEV|PCNT}<newline><^END>
Related commands
:CALCulate1:MATH:STATe
:CALCulate2:MATH:EXPRession:NAME
:DATA[:DATA]
Equivalent key [Meas Setup] - DEV A - delta ABS|delta %
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
(:CALCulate1:MATH:EXPRession:NAME
Description
Displays the result in the difference between the measurement
value and the reference value
value).
Displays the difference between the measurement value and the
reference value
1. Use the
:DATA[:DATA]
2. (Measurement value - reference value) / reference value×100
on page 208
command). The query response
on page 189
1
(measurement value - reference
*1 in a percentage
command to set the reference value.
on page 190
on page 192
2
to the reference value.
189