Table of Contents
Advertisement
Command Reference
E4981A SCPI Commands
:CALibration:CABLe[:LENGth]
Syntax
:CALibration:CABLe[:LENGth] <numeric>
:CALibration:CABLe[:LENGth]?
Description
Sets the measurement cable length.
Parameters
Description
Range
Initial value
Unit
Resolution
If the specified parameter is out of the allowable setup range, the minimum
value (if the lower limit of the range is not reached) or the maximum value (if
the upper limit of the range is exceeded) is set.
MAX or MIN can be used to specify the parameters.
Query response
{numeric}<newline><^END>
Equivalent key
[Meas Setup] - CORRECTION - CABLE
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
<numeric>
Desired cable length
0 to 2
0
m (meter)
1
171
Advertisement
Table of Contents
