Calculate1:Comparator:beeper:condition - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate1:COMParator:BEEPer:CONDition

Syntax :CALCulate1:COMParator:BEEPer:CONDition {FAIL|PASS}
:CALCulate1:COMParator:BEEPer:CONDition?
Description Sets the condition for producing a beep sound: when sorting with the
comparator fails (sorts into any BIN other than BIN1 to BIN9) or passes (sorts
into BIN1 to BIN9).
Parameters
FAIL (initial value)
PASS
Query response {FAIL|PASS}<newline><^END>
Related commands
:SYSTem:BEEPer:STATe
:CALCulate1:COMParator:BEEPer[:STATe]
Equivalent key [Meas Setup] - LIMIT TABLE - BEEP
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
Instructs the instrument to beep when the sorting fails.
Instructs the instrument to beep when the sorting pass.
on page 273
on page 174
173