Command Reference
E4981A SCPI Commands
:FORMat[:DATA]
Syntax
:FORMat[:DATA] {ASCii|REAL}
:FORMat[:DATA]?
Description
Sets the transfer format of data read out using the following commands:
•
•
•
•
•
•
•
For details on the data transfer formats, refer to
page
Parameters
ASCii (initial value)
REAL
Query response
{ASC|REAL}<newline><^END>
Equivalent key
No equivalent key is available on the front panel.
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
on page 220
:FETCh?
on page 230
:READ?
on page 163
*TRG
on page 208
:DATA[:DATA]
[:SENSe]:CORRection:DATA
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF1:DATA?
[:SENSe][:FIMPedance]:CONTact1:VERify:BUF2:DATA?
63.
Description
Specifies the ASCII data transfer format.
Specifies the 64-bit real number data transfer format.
on page 240
"Data Transfer Format" on
on page 253
on page 256
225