Reading Out Sorting Judgment Result - Keysight E4981A Programming Manual

Sorting Based on Measured Result (Comparator Function)

Reading Out Sorting Judgment Result

Reading Out Sorting Judgment Result
You can read out the sorting judgment result (readout value) along with the
measured result by the comparator function according to the correspondences
in
commands:
•
•
•
The comparator sorting result is read out as an integer between 0 and 11, as
shown in the table below.
Table 7-2 Relationship between comparator sorting result and readout value
Readout value
0
1
2
3
4
5
6
7
8
9
10
11
To display the comparator sorting result use the following command to select
the <BIN No. DISPLAY> page.
•
78
Figure 7-1. To do read out sorting judgment results, use the following
on page 163
*TRG
on page 220
:FETCh?
on page 230
:READ?
Comparator sorting resul t
OUT_OF_BINS
BIN1
BIN2
BIN3
BIN4
BIN5
BIN6
BIN7
BIN8
BIN9
AUX_BIN
Cannot be sorted (OVLD or NC is detected)
on page 213
:DISPlay:PAGE
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter