Data:feed:buf1 - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:DATA:FEED:BUF1

Syntax :DATA:FEED:BUF1 {"CALCulate1"|"CALCulate2"|""}
:DATA:FEED:BUF1?
Description Selects the measurement data fed into data buffer 1 from the following:
primary parameter, secondary parameter, or none to be fed. The query
response is a string with double quotation marks (").
The functionality of this command is same as
value of BUF1.
Parameters
"CALCulate1"
"CALCulate2"
"" (initial value)
Query response {"CALCulate1"|"CALCulate2"|""}<newline><^END>
Related commands
:DATA:FEED:CONTrol[:STATe]
:DATA:POINts:BUF1
Equivalent key No equivalent key is available on the front panel.
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
Specifies the primary parameter as the measurement data fed into
the data buffer 1.
Specifies the secondary parameter as the measurement data fed
into the data buffer 1.
Does not feed the measurement data into the data buffer 1.
on page 200
on page 202
:DATA:FEED[:SOURce]
with
195