Table of Contents
Advertisement
Command Reference
E4981A SCPI Commands
E4981A SCPI Commands
This section describes the SCPI commands of the E4981A.
:ABORt
Syntax
:ABORt
Description
Resets the trigger system and places the trigger sequence in the idle state.
If the trigger system is set to start up successively (ON is specified with the
:INITiate:CONTinuous
after the transition to the idle state.
For details on the trigger system, refer to
query)
Related commands
:INITiate[:IMMediate]
:INITiate:CONTinuous
Equivalent key
No equivalent key is available on the front panel.
sequence
164
command), the trigger system starts up immediately
"Trigger system" on page
on page 228
on page 227
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
57. (No
Advertisement
Table of Contents
