Making WLAN Measurements
Making Monitor Spectrum Measurements
Viewing Monitor Spectrum Measurement Results
Measurement results are shown as a spectrum domain window.
For more information on what these data are, see the N9077A & W9077A
WLAN Measurement Application User's and Programmer's Reference.
Click to Go Back to
Example of One-Button-Measurement - Monitor Spectrum
This example assumes the signal is correctly applied to the input.
Step 1. Press Mode Preset
Step 2. Press Meas, Monitor Spectrum
Step 3. View the measurement default view. (See
Figure 2-33
Monitor Spectrum (Default View)
If you have a problem, and get an error message, see Instrument Messages.
80
"Making Monitor Spectrum Measurements" on page
Figure
2-33).
Keysight WLAN Measurement Guide
78.