Reading Data During Measurement - Keysight B2980 Series Programming Manual

Measurement
Result Example
Programming Examples

Reading Data during Measurement

Reading Data during Measurement
A program example for reading data is shown in Table 2-9. This example is used to
read data during measurement. This example returns data in ASCII format.
For example, this example code can be used instead of the lines from 4 to 39 of the
sampling measurement program shown in Table 2-5.
Measurement data can be read by using the following command.
Function
Read sense data
offset indicates the beginning of the data received n | CURRent | STARt (default).
size is the number of data to be received.
Data(1) -1.282000E-12,+4.999999E+00
Data(2) -6.000000E-14,+1.500000E+01
Data(3) +7.760000E-13,+2.500000E+01

2- 32
Command
:SENS:DATA? [offset[, size] ]
Keysight B2980 Programming Guide, Ed ition 1