Table of Contents
Advertisement
Command Reference
E4981A SCPI Commands
:TRIGger:SEQ2:DELay
Syntax
:TRIGger:SEQ2:DELay <numeric>[mS|S]
:TRIGger:SEQ2:DELay?
Description
Specifies the waiting time between when a trigger is inputted and when the
measurement starts (trigger delay time).
Parameters
Description
Range
Initial value
Unit
Resolution
If the specified parameter is out of the allowable setup range, the minimum
value (if the lower limit of the range is not reached) or the maximum value (if
the upper limit of the range is exceeded) is set.
A fraction below the resolution is rounded off. MAX or MIN can be used to
specify the parameters.
{numeric}<newline><^END>
Query response
Equivalent key
[Meas Setup] - TRIG DLY
sequence
306
<numeric>
Trigger delay time
0 to 1
0
s (second)
100u
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Advertisement
Table of Contents
