Display[:Window]:Text1[:Data]:Fmsd:data - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA

Syntax :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA <numeric>
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA?
Description Sets the value of the highest digit of the primary parameters in the fixed point
display. The parameter is always fixed to the same value, regardless of this
setting, if the following conditions are met:
•
•
Parameters
Description
Range
Initial value
If one of the settable values is not specified for the parameter, the minimum
possible value, which is larger than the specified parameter value, is set. If the
specified parameter exceeds the maximum value, the maximum value is set.
MAX or MIN can be used to specify the parameters.
Query response {numeric}<newline><^END>
Related commands
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe]
:CALCulate1:MATH:EXPRession:NAME
:CALCulate1:MATH:STATe
:CALCulate2:MATH:EXPRession:NAME
:CALCulate2:MATH:STATe
Equivalent key [Display Format] - <Primary Measurement Parameter i.e Cp/Cs> - D.P. POS
sequence INCR+|D.P. POS DECL-
216
Deviation is displayed as a percentage in the deviation measurement mode.
The resulting D, Q and % of the secondary parameter is displayed.
<numeric>
The value of the highest digit of the primary parameter.
1a|10a|100a|1f|10f|100f|1p|10p|100p|1n|10n|100n|1u|10u|100u|1
m|10m|100m|1|10|100|1k|10k|100k|1M|10M|100M|1G|10G|100G
|1T|10T|100T|1P|10P|100P|1E
1n
on page 189
on page 190
on page 192
on page 193
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
on page 217