Data:feed:control:buf3[:State] - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:DATA:FEED:CONTrol:BUF3[:STATe]

Syntax :DATA:FEED:CONTrol:BUF3[:STATe] {NEVer|ALWays}
:DATA:FEED:CONTrol:BUF3[:STATe]?
Description Determines whether the measurement data is fed into data buffer 3 never or
always.
Parameters
ALWays
NEVer (initial
value)
Query response {NEV|ALW}<newline><^END>
Related commands
:DATA:FEED:BUF1
:DATA:POINts:BUF1
Equivalent key [Save/Recall] - CATALOG - SAVE DATA - START LOG
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
Feeds the measurement data into the data buffer 3 specified with
BUF3 each time a measurement is performed.
Does not feed the measurement data into the data buffer specified
with BUF3.
on page 195
on page 202
199