Calculate1:Comparator:beeper[:State] - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate1:COMParator:BEEPer[:STATe]

Syntax :CALCulate1:COMParator:BEEPer[:STATe] {ON|OFF|1|0}
:CALCulate1:COMParator:BEEPer[:STATe]?
Description Turns ON/OFF the beep output.
If you turn off the beep output, the beep sound is not produced, regardless of
the sorting result of the comparator.
This command has the same function as the
command.
Parameters
ON or 1 (initial value)
OFF or 0
Query response {1|0}<newline><^END>
Related commands
:SYSTem:BEEPer:STATe
:CALCulate1:COMParator:BEEPer:CONDition
Equivalent key [Meas Setup] - LIMIT TABLE - BEEP
sequence
174
:SYSTem:BEEPer:STATe
Description
Turns ON the beep output.
Turns OFF the beep output.
on page 273
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
on page 173