Data:feed[:Source] - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:DATA:FEED[:SOURce]

Syntax :DATA:FEED[:SOURce] {BUF1|BUF2},{"CALCulate1"|"CALCulate2"|""}
:DATA:FEED[:SOURce]? {BUF1|BUF2}
Description Selects the measurement data fed into data buffer 1 or data buffer 2 from the
following: primary parameter, secondary parameter, or none to be fed. The
query response is a string with double quotation marks (").
Parameters
BUF1
BUF2
"CALCulate1"
"CALCulate2"
"" (initial value)
Query response {"CALCulate1"|"CALCulate2"|""}<newline><^END>
Related commands
:DATA:FEED:BUF1
:DATA:POINts:BUF2
Equivalent key No equivalent key is available on the front panel.
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Description
Specifies data buffer 1, to which the
{"CALCulate1"|"CALCulate2"|""} setting is applied or reads out the
setup of data buffer 1.
Specifies data buffer 2, to which the
{"CALCulate1"|"CALCulate2"|""} setting is applied or reads out the
setup of data buffer 2.
Description
Specifies the primary parameter as the measurement data fed into
the data buffer specified with {BUF1|BUF2}.
Specifies the secondary parameter as the measurement data fed
into the data buffer specified with {BUF1|BUF2}.
Does not feed the measurement data into the data buffer specified
with {BUF1|BUF2}.
on page 195
on page 203
201