Calculate1:Comparator:count:multiple:data - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate1:COMParator:COUNt:MULTiple:DATA?

Syntax :CALCulate1:COMParator:COUNt:MULTiple:DATA?
Description Reads out each count value of BIN1 to BIN9, OUT_OF_BINS, and AUX_BIN of
the selected channel.
When the multi-correction function is turned off, reads out normal count
values (common value for all channels). In other words, this command has the
same function as the
Reads out all BIN count values regardless of the ON/OFF state of each BIN (set
with the
(Query only)
Parameters
{numeric 1}
{numeric 2}
{numeric 3}
{numeric 4}
{numeric 5}
{numeric 6}
{numeric 7}
{numeric 8}
{numeric 9}
{numeric 10}
{numeric 11}
Query response {numeric 1},...,{numeric 11}<newline><^END>
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
:CALCulate1:COMParator:COUNt:DATA?
:CALCulate1:COMParator:PRIMary:BIN{1-9}:STATe
Description
The count value of BIN1 of selected channel.
The count value of BIN2 of selected channel.
The count value of BIN3 of selected channel.
The count value of BIN4 of selected channel.
The count value of BIN5 of selected channel.
The count value of BIN6 of selected channel.
The count value of BIN7 of selected channel.
The count value of BIN8 of selected channel.
The count value of BIN9 of selected channel.
The count value of OUT_OF_BINS of selected channel.
The count value of AUX_BIN of selected channel.
command.
command).
177