Display[:Window]:Text1[:Data]:Fmsd[:State] - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe]

Syntax :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe] {ON|OFF|1|0}
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe]?
Description Determines whether to use the fixed point display when displaying both the
primary and secondary parameters. In the following cases, the fixed point
display is always used regardless of this setting (the value of the highest digit is
also fixed).
•
•
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Related commands
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD:DATA
:CALCulate1:MATH:EXPRession:NAME
:CALCulate1:MATH:STATe
:CALCulate2:MATH:EXPRession:NAME
:CALCulate2:MATH:STATe
Equivalent key [Display Format] - <Primary Measurement Parameter i.e Cp/Cs> - D.P.
sequence AUTO|D.P. FIX
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
When displaying deviation as a percentage in the deviation measurement
mode.
When displaying the results of D, Q and % of the secondary parameter.
Description
Specifies the fixed point display.
Specifies the floating point display.
on page 189
on page 190
on page 192
on page 193
on page 216
217