Data:reference1:Data - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:DATA:REFerence1:DATA

Syntax :DATA:REFerence1:DATA <numeric>
:DATA:REFerence1:DATA?
Description Sets or reads out the reference value for the primary parameter used in the
deviation measurement mode.
The functionality of this command is same as
REF1.
Parameters
Range
Initial value
If the specified parameter is out of the allowable setup range, the minimum
value (if the lower limit of the range is not reached) or the maximum value (if
the upper limit of the range is exceeded) is set.
Query response {numeric}<newline><^END>
Related commands
:DATA:REFerence2:DATA
Equivalent key [Meas Setup] - REF A or B
sequence
206
<numeric>
-99.9999E9 to 99.9999E9
0
on page 207
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
with value of
:DATA[:DATA]