Table of Contents
Advertisement
Overview of Remote Control
LAN Remote Control System
Preparing the external controller
To establish communication with the E4981A using the TCP/IP protocol, you
need to set the I/O interface of the external controller in advance. This section
shows the setting procedure when using the external controller in the Windows
environment.
Step 1.
From your PC's Start menu, click Program - Keysight I/O Libraries Suite -
Keysight Connection Expert to open the Keysight Connection Expert setting
screen.
Step 2.
In the Keysight Connection Expert setting screen, select Manual
Configuration and at the Add New Instruments/Interfaces tab, select LAN
instrument.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
23
Advertisement
Table of Contents
