Keysight E4981A Programming Manual page 374

Operations when Overload, No Contact, or Low C is Detected
Operations when Overload/No Contact/Low C is Detected
Table D-5 At-a-glance table of operations when Overload/No contact/Low C reject is detected
Mea-
sured
value
Overload OVLD
No contact N.C.
Low C Normal
Out of display
-------
3
range
1. When Low C is detected, LOWC is displayed in BIN No. DISPLAY page.
2. /LOWC_OR_NC becomes active together with the signal that corresponds to the result of normal sorting
judgment (judgment result when no error occurred).
3. When an out-of-display-range state is detected, measurement is performed normally but the measured val-
ues are not displayed.
374
Display output
Vol tage/
Compara-
current
tor sort-
monitor
ing resul t
value
--- ---
--- ---
1
Normal
LOWC
--- Normal
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
GPIB/LAN/USB output
Measure- Mea- Compar-
ment sta- sured ator sort-
tus value ing resul t
1 9.9E37
2 9.9E37
2 Normal
Normal Normal
Handler output
(handler signal
that becomes
active)
11 /OVLD
11 /LOWC_OR_NC
Normal
/LOWC_OR_NC
Normal Normal
2