Calculate2:Math:state - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:CALCulate2:MATH:STATe

Syntax :CALCulate2:MATH:STATe {ON|OFF|1|0}
:CALCulate2:MATH:STATe?
Description Determines whether to use the function (deviation measurement mode) that
displays the secondary parameter measurement result as deviation from the
reference value (set using the
Changing any of the measurement parameters will automatically disable
this function. To avoid this, you have to write a program so that this
command is executed after the execution of the measurement parameter
setup command
Parameters
ON or 1
OFF or 0 (initial value)
Query response {1|0}<newline><^END>
Related commands
:CALCulate2:MATH:EXPRession:NAME
:CALCulate1:FORMat
:CALCulate2:FORMat
:CALCulate1:MATH:STATe
Equivalent key [Meas Setup] - DEV B - OFF
sequence
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
:DATA[:DATA]
(:CALCulate1:FORMat
Description
Enables the deviation measurement mode.
Disables the deviation measurement mode (i.e., displays
the measurement result as an absolute value).
on page 188
on page 191
on page 190
command).
and :CALCulate2:FORMat).
on page 192
193