Command Reference
E4981A SCPI Commands
:SYSTem:BEEPer:TONE
Syntax
:SYSTem:BEEPer:TONE <numeric>
:SYSTem:BEEPer:TONE?
Description
Selects the beep sound tone.
Parameter
Range
Initial (Factory set) value
Resolution
The value of this command is not changed with
and is only changed with Factory Default reset (available only through
Front Panel).
{1|2|3|4|5}<newline><^END>
Query response
Equivalent key
[System] - SYSTEM CONFIG - BEEPER TONE -
TONE1|TONE2|TONE3|TONE4|TONE5
274
<Numeric>
1 to 5
3
1
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
and
*RST
:SYSTem:PRESet