Configuring The Service Through The N2000 Bms; Catv Service; Upgrading The Ont - Huawei EchoLife HG861 Manual

EchoLife HG861 GPON Terminal
----End

3.2 Configuring the Service Through the N2000 BMS

This topic describes how to configure the CATV service and upgrade the ONT through the
N2000 BMS.
Context

3.2.1 CATV Service

3.2.2 Upgrading the ONT

To upgrade the ONT remotely through the NMS on the OLT side, do as follows:
3.2.3 Collecting the Fault Information
When the GPON service is faulty, you need to collect the fault information through the NMS.
3.2.1 CATV Service
Context
For details on configuring the CATV service on the N2000 BMS, see sections GPON Service
Profile and GPON ONT Capability Profile in the Configuration Guide.
3.2.2 Upgrading the ONT
To upgrade the ONT remotely through the NMS on the OLT side, do as follows:
Procedure
Step 1 On the Physical Map navigation tree on the Main Topology tab page, double-click the required
OLT; or select the required OLT, right-click, and then choose Device Management.
Step 2 Choose GPON > GPON ONU from the navigation tree on the tab page that is displayed.
Step 3 On the GPON ONU tab page, set the querying criteria to display the required GPON ONUs.
Step 4 Select a required ONU from the list, right-click, and then choose Upgrade Terminal.
The NMS version is R12C03.
----End
Issue 01 (2009-07-30)
NOTE
The PLOAM protocol is defined in the ITU-T G.984.3 and is used for the operation, maintenance, and
l
management of the physical layer.
OMCI is a master-slave management protocol. The OLT is the master device; the ONT is the slave
l
device. The OLT controls multiple ONTs through the OMCI channel.
TIP
The parameters related to the CATV service are Number of CATV Ports in the GPON service profile and
Number of CATV ANI Ports and Number of CATV UNI Ports in the GPON ONT capability profile.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration Guide
3-3