Configuring Email Notification - Huawei EN83CTLA User Manual

EN83CTLA SNMP Card
User Manual
Procedure
Step 1 Log in to the WebUI. For details, see
Step 2 Check the running information about the ambient T/H sensor on the WebUI.
Choose Monitoring > Amb. T/H Sensor Summary > Amb. T/H Sensor1 >
Running Information.
Figure 5-3 Running Information
----End

5.3 Configuring Email Notification

Procedure
Step 1 Log in to the WebUI. For details, see
Step 2 Set the outbox parameters.
The following uses the 163 mailbox as an example to describe how to configure
the outbox.
Choose System Settings > Outbox Configuration > Outbox Settings.
Figure 5-4 Outbox Settings
1.
2.
Issue 04 (2024-01-30)
Set Address type to Domain name. Set the address type based on site
requirements.
To configure the IP address of the DNS server, choose System Settings >
Comm. Settings.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4.1 Logging In to the
4.1 Logging In to the
5 Device Commissioning
WebUI.
WebUI.
33