Advertisement
3 Configuring the MT880a
After you enable the embedded dial-up function of the MT880a, when
the MT880a is not used for the network access, power off the MT880a.
Otherwise, even if you have shut down your computer, the network
operator may still charge you for the network access.
Step 1 Log in to the Web configuration page.
1. Launch the Internet Explorer on the computer. Enter http://192.168.1.1 in
the address bar and press Enter.
2. In the displayed dialog box, enter the user name and the password, and then
click OK.
By default, both the user name and the password are admin. After the password is
verified, you can access the Web configuration page.
Step 2 Enable the embedded dial-up function.
1. In the navigation tree on the left of the Web Configurator, choose Basic >
WAN Setting.
2. Select a PVC number, such as 1, from the PVC drop-down combo box.
3. Enter the VPI and VCI parameters that are provided by the network operator
in the VPI and VCI text boxes.
4. Select Yes from the Active drop-down combo box and select Routing from
the Mode drop-down combo box.
5. Enter the user name and password that are provided by the network
operator in the Username and Password text boxes , keep the default settings
of other parameters.
6. Click Submit to save the settings.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer only once. The next time
when you power on the computer, you can surf the Internet without performing any
configuration.
4 Indicators
Indicator
POWER
Status
Description
On
The MT880a is powered on.
Off
The MT880a is powered off.
5
Advertisement
