Show Module - Avaya G450 Cli Reference Manual

CLI Commands
Example
To display information about media module 7:
G450-001(super)# show mm 7
MEDIA MODULE DESCRIPTION: v7
-------------------------------------------------
Uptime(d,h:m:s): 0, 00:23:19
Type
Description
Serial Number
HW Vintage
HW Suffix
FW Version
No. of ports
Faults
Related Commands
set utilization cpu,
show restart-log,
show voltages,

show module

Use the show module command to view information about a media module. If no media
module is specified, information about all media modules is displayed.
Syntax
show module [mmID]
Parameters
Parameter
mmID
User Level
read-only
Context
general
264 Avaya G450 CLI Reference
: Voice (Initializing)
: N/A
: N/A
: N/A
: N/A
: N/A
: 0
: No Fault Messages
show faults, show mg
show download, show
test led
Description
The Media Module ID
list_config, show mgc,
system, show temp, show
Device status
show module, show recovery,
timeout, show utilization,
Possible Default
Values Value