Installing A Camera - Huawei IDS2000 Installation Manual

IDS2000 Intelligent Micro-Modular Data Center
Installation Guide (2000 mm High Cabinet in Dual-Row
Aisle Containment)

4.11.10.1 Installing a Camera

Prerequisites



Context


Procedure
Step 1 (Optional) Install an SD card.
1.
2.
Issue Draft A (2015-06-29)
A camera and tools for installing it have been prepared.
A network cable for connecting the camera to the LAN switch has been prepared.
The LAN switch can be normally powered on.
This section describes how to install and commission a camera in an aisle. Two persons
are required for the commissioning.
A camera should be installed on the control skylight.
 Only Micro SD cards can be installed in this series of IP cameras.
 For the camera installation method, see the documents delivered with the camera.
Loosen the screws on the front cover of the camera using a wrench, remove the front
cover, and take out the inner cover over the lens, as shown in
Figure 4-151 Removing front and inner covers
Gently insert a Micro SD card into the SD card slot, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Installation
Figure 4-151.
Figure 4-152.
126