Applying Power To The Charging Unit; Mounting The Base To A Standard Wall Plate; Figure 2-119 Applying Power To The Charging Unit; Figure 2-120 Polarized Plug - NEC SL1100 Hardware Manual

SL1100

6.1.4 Applying Power to the Charging Unit

The unique design of the telephone allows the user to place the handset in the charging unit with or
without the belt clip attached. The charging unit can charge a second battery with or without the
handset being charged. The battery packs can be recharged automatically either in or out of the
handset.
Use only the supplied AC adapter for the charging unit.
The AC adapter furnished with this telephone usually has a polarized line plug with one blade wider
than the other. This plug fits in the power outlet only one way. If you cannot insert the plug fully in the
outlet, try reversing the plug.
Refer to Figure 2-120 Polarized Plug on this
If you cannot plug the AC adapter in the outlet, you may need to replace it.
Route the power cord where it can not create a trip hazard, or where it could
become chafed and create a fire or other electrical hazards.

6.1.5 Mounting the Base to a Standard Wall Plate

The base unit can be mounted on a standard wall plate. To attach the wall mount stand to the base
unit:
1. Slide the wall mount stand in the notches at the top of the base unit.
2-74

Figure 2-119 Applying Power to the Charging Unit

page.

Figure 2-120 Polarized Plug

ISSUE 1.0
Installation