Station To Call Appearance Block Assignment (Memory Block 4-43); Multiline Terminal Type Selection (Memory Block 4-50); Prt Channel Assignment (Memory Block 1-13-00); Call By Call Service Selection (Memory Block 1-13-03) - NEC Electra Elite IPK Programming Manual

Electra Elite IPK
___________________________________________________________________________________
___________________________________________________________________________________
Programming Manual

3.3.28 Station to Call Appearance Block Assignment (Memory Block 4-43)

Use this Memory Block to assign a multiline Terminal to a Call
Appearance Block.
Default: All stations are assigned to CAP Block 00

3.3.29 Multiline Terminal Type Selection (Memory Block 4-50)

Use this memory Block to select the Multiline Terminal type.
Default: 16 Line Keys

3.3.30 PRT Channel Assignment (Memory Block 1-13-00)

Use this Memory Block to assign B channels for PRI.
Default: 24

3.3.31 Call by Call Service Selection (Memory Block 1-13-03)

Use this Memory Block to specify whether (YS) or not (NO) Call by
Call is specified per PRT line.
Default: NO

3.3.32 Call by Call Type of Number Assignment (Memory Block 1-10-02)

Use this Memory Block to specify a TN for each Route Advance
Block (RAB) as 0 (Unknown), 1 (International), 2 (National), 3
(Network Specific), or 4 (Subscriber or local).
Default: 0 for all RABs

3.3.33 Call by Call Numbering Plan ID Assignment (Memory Block 1-10-03)

Use this Memory Block to specify Numbering Plan ID (NPI) for each
RAB as 00 (Unknown), 1 (ISDN/Telephony), 2 (Reserved), 3 (Data,
in the future), or 9 (Private).
Default: 0 for all RABs

3.3.34 Call by Call Type of Network ID Assignment (Memory Block 1-10-00)

Use this Memory Block to specify Type of Network ID (TNI) for each
RAB as 0,1 (Reserved), 2 (National Network), 3~7 (Reserved).
The Network ID (Memory Block 1-10-04) must be assigned.
Default: 2 for all RABs
Document Revision 4
3 - 37