Chapter 2 - Blade Installation and Startup
S
2-1
ECTION
BLADE LAYOUT
2.1.1
Blade Location
Determine the slot position for each blade. In the Controlling chassis:
Slot 1 - dedicated for the CCPU
●
EXIFU slot - dedicated for the Expansion blade
●
In the Expansion Chassis:
EXIFU slot - dedicated for the Expansion blade
●
The Controlling/Base and Expansion Chassis:
Slots 2-16 are universal (any type of blade can be installed)
●
●
●
Chapter 2
Make sure to follow the steps indicated in
Installation
(page 2-91) for an initial system install. This will ensure that you start the
system with the default system settings.
To delete a blade from the system, the blade must first be removed from the system
chassis, then Program 90-05-01 can be used to delete the slot definition.
Chapter 2 -
Blade Installation
and Startup
Important Notes
Powering Up the System/Initial Blade
2 - 1