Bgp As Path Access Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Confederation Peer
Action
Confederation Peer AS
List (1-4294967295)
Click the Apply button to accept the changes made.

BGP AS Path Access Settings

This window is used to configure an Autonomous System path access list.
To view the following window, click L3 Features > BGP > BGP AS Path Access Settings, as shown below:
The fields that can be configured are described below:
Parameter
List Name
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
The fields that can be configured are described below:
Parameter
Mode
Use the drop-down menu to select Add or Delete.
Enter one or multiple AS number partitions, each separated by a comma. These are
the Autonomous System numbers for BGP peers that will belong to the
confederation.
Figure 6-161 BGP AS Path Access Settings window
Description
Enter an Autonomous System path access list name.
Figure 6-162 BGP AS Path Access Settings - View Detail window
Description
Use the drop-down menu to Permit or Deny advertisement based on matching
conditions.
296