Table of Contents
Advertisement
3 Getting Started
10.x.y.z (where x/y is a number between 0 and 254 and z is a number between 1 and 254), and a subnet
mask of 255.0.0.0. To launch the web interface, simply open any compatible web browser, enter 10.90.90.90
(the factory-default IP address) in the address bar, and press ENTER.
This will automatically load the web configuration in your web browser.
When prompted to log in, enter the default password admin and press OK to continue.
Web-based Management
Please refer to Chapter 4
D-Link Network Assistant (DNA)
D-Link Network Assistant (DNA) is a program that is used to discover switches which are in the same Layer
2 network segment as your PC. You can download the DNA App from the D-Link official website.
1.
Go to the D-Link official website at: https://tools.dlink.com/intro/dna/.
2.
Click the Free Download button to go the the Download window.
3.
Click the Download button to download the DNA installer file to your local hard drive.
4.
Run the DNA installer file and follow the on-screen instructions to complete the installation.
Figure 3.2 - Enter the IP address 10.90.90.90 in the web browser
NOTE: The Switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
Figure 3.3 - Logon Dialog Box
Configuration
for detailed instructions.
NOTE: Refer to D-Link Network Assistant (DNA)
User Guide for more detail.
D-Link Smart Managed Switch User Manual
8
Advertisement
Table of Contents
