Table of Contents
Advertisement
3 Getting Started
The web configuration can also be accessed through the SmartConsole Utility. Open the SmartConsole
Utility and double-click the switch as it appears in the Monitor List. This will automatically load the web
configuration in your web browser.
When the following logon dialog box appears, enter the password of the Web-based Management interface
then click OK.
By default, the username and password are null.
Smart Wizard
After a successful login, the Smart Wizard will guide you through essential settings of the D-Link DGS-2000
Series Ethernet Switch. Please refer to the Smart Wizard Configuration section for details.
Web-based Management
By clicking the Exit button in the Smart Wizard, you will enter the Web-based Management interface. Please
refer to Chapter 4
Web-based Switch Configuration
D-Link Network Assistant
D-Link Network Assistant (DNA) is a program that is used to discover switches which are in the same layer 2
network segment as your PC. You can download the DNA utility from http://tools.dlink.com/intro/dna/. Please
go to above link for details.
Figure 3.2 –Enter the IP address 10.90.90.90 in the web browser
NOTE: The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
Figure 3.3 – Logon Dialog Box
D-Link DGS-2000 Series Ethernet Switch User Manual
for detailed instructions.
2
2
4
4
Advertisement
Table of Contents
