Table of Contents
Advertisement
Available languages
Available languages
3. Attach the terminal lug ring at the other end
of the grounding cable to an appropriate
grounding source.
4. Verify that the connection between the
grounding connector on the switch and the
grounding source is secure.
Powering On the Switch
1. Connect the power cord to the power connector
on the switch.
2. Plug the other end of the power cord into a
nearby power socket.
Attaching the Power Cord Retainer
To prevent the power from accidently being
disconnected, it is recommend to install the included
power cord retainer.
1. With the smooth side facing up, insert the tie into
the opening below the power socket.
Figure 7
2. Plug the power cord into the power socket on
the switch.
Figure 8
3. Slide the retainer through the tie until it has
reached the end of the power cord.
Figure 9
4. Wrap the tie of the retainer strip around the
power cord and back into the retainer to lock it.
Fasten the tie until the power cord is secured.
Figure 10
Connecting to the Network
The switch can be integrated into the network
through one of the following connection methods:
Switch to End Node or Powered Device
Use a standard Ethernet cable to connect the switch
to PCs with an 10/100/1000 Mbps RJ-45 interface,
or connect and power remote IEEE 802.3af/at-
compliant devices, such as IP cameras or IP phones
using PoE.
4
Advertisement
Table of Contents
