Web-Based Management; D-Link Network Assistant (Dna) - D-Link DES-1210/ME Series Manual

When the following logon dialog box appears, enter the password and choose the language of the Web-
based Management interface then click OK.
By default, the Username and Password are empty.

Web-based Management

By clicking the OK button in Logon Dialog Box, you will enter the Web-based Management interface. Please
refer to Chapter 4 Configuration

D-Link Network Assistant (DNA)

The D-Link Network Assistant (DNA), included in the installation CD, is a program that allows administrators
to quickly discover all D-Link smart switches and D-Link Discover Protocol (DDP) supported devices (for a
list of supported models, refer to the D-Link Network Assistant (DNA) User Guide), that are in the same
subnet as the PC, collect traps and log messages, and provide quick access to basic configurations of the
switch. This tool is only for computers running Windows 7, Vista, XP, or 2000 on both 32/64bit systems.
There are two options for the installation of the DNA; one is through the Autorun program on the installation
CD and the other is manual installation.
For detailed explanations of the DNA functions, please refer to D-Link Network Assistant (DNA) User Guide.
DES-1210/ME Series Metro Ethernet Managed Switch User Manual
Figure 3.2 –Enter the IP address 10.90.90.90 in the web browser
NOTE: The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
Figure 3.3 – Logon Dialog Box
for detailed instructions.
NOTE: Please be sure to uninstall any existing
DNA from your PC before installing the latest
DNA.
1 1 1 1