Clock Update-Calendar; Exec-Timeout - D-Link DES-7200 Cli Reference Manual

Chapter 2 Switch Management Configuration Commands
commands
2.2.2

clock update-calendar

In the privileged EXEC mode, you can execute command clock update-calendar to
overwrite the value of hardware clock by software clock.
clock update-calendar
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
2.2.3

exec-timeout

To configure the connection timeout to this equipment in the LINE, use the exec-timeout
command.Once the connection timeout in the LINE is cancelled by the no exec-timeout
command, the connection will never be timeout.
exec-timeout minutes [seconds]
2-14
Show current clock.
show clock
N/A.
Privileged EXEC mode.
Some platforms use hardware clock to complement software clock.
Since battery enables hardware clock to run continuously, even
though the device is closed or restarts, hardware clock still runs.
If hardware clock and software clock are asynchronous, then
software clock is more accurate. Execute clock update-calendar
command to copy date and time of software clock to hardware clock.
The example below copys the current time and date of software clock
to hardware clock:
DES-7210# clock update-calendar
Command Description
clock Set the softwar clock with the hardware clock
value.
read-calendar
DES-7200 CLI Reference Guide