Lockable - D-Link DES-7200 Cli Reference Manual

Chapter 2 Switch Management Configuration Commands
Examples
Related
commands
2.1.12

lockable

To support the use of the lock command at the terminal, execute the lockable command in
the line configuration mode. The terminal doesn't support the lock command, by
default.Use the no command to cancel the setting.
lockable
no lockable
Parameter
description
Command
mode
Usage
guidelines
Examples
2-10
The example below locks a terminal interface:
DES-7210(config-line)# lockable
DES-7210(config-line)# end
DES-7210# lock
Password: <password>
Again: <password>
Locked
Password: <password>
DES-7210#
Command
lockable
N/A.
Line configuration mode.
This command is used to support the terminal lock function in
corresponding line. To lock the terminal, execute the lock command
in the EXEC mode.
The example below enables the terminal lock function at the console
port and locks the console:
DES-7210(config)# line console 0
DES-7210(config-line)# lockable
DES-7210(config-line)# end
DES-7210# lock
Password: <password>
Again: <password>
DES-7200 CLI Reference Guide
Description
Set to support the terminal lock function in the
line.