Lock - D-Link DES-7200 Cli Reference Manual

Hide thumbs Also See for DES-7200:

Table of Contents

DES-7200 CLI Reference Guide

lock

To set a temporary password at the terminal, execute the EXEC mode command lock.

Chapter 2 Switch Management Configuration Commands

The example below configures a username and password and bind

the user to level 15.

DES-7210(config)# username test privilege 15 password 0 pw15

Privileged mode.

You can lock the terminal interface but maintain the continuity of

session, to prevent it from being accessed by setting the temporary

password.The terminal interface can be locked by the steps below:

Enter the lock command, and the system will prompt you to

enter the password:

Enter the password, which may be any string.The system will

prompt you to confirm the entered password, and then clear the

screen as well as show the "Locked" information.

To enter into the terminal, enter the set temporary password.

To use the terminal locked function at the terminal, execute the

lockable command in the line configuration mode, and enable the

characteristic to support the terminal lock in corresponding line.

Enable local authentication