Smart Wizard; Web-Based Management; D-Link Network Assistant - D-Link DGS-1210 Series Manual

3 Getting Started
The web configuration can also be accessed through the SmartConsole Utility. Open the SmartConsole
Utility and double-click the switch as it appears in the Monitor List. This will automatically load the web
configuration in the web browser.
When the following logon dialog box appears, enter the password and choose the language of the Web-
based Management interface then click OK.
The switch supports 10 languages including English, Traditional Chinese, Simplified Chinese, German,
Spanish, French, Italian, Portuguese, Japanese and Russian. By default, the password is admin and the
language is English.

Smart Wizard

After a successful login, the Smart Wizard will guide the user through essential settings of the D-Link Smart
Managed Switch. Please refer to the Smart Wizard Configuration section for details.

Web-based Management

By clicking the Exit button in the Smart Wizard, user will enter the Web-based Management interface.
Please refer to Chapter 4

D-Link Network Assistant

D-Link Network Assistant (DNA) is a program that is used to discover switches which are in the same layer 2
network segment as
http://tools.dlink.com/intro/dna/. Please go to above link for details.
NOTE: The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
Figure 3.3 – Logon Dialog Box
Web-based Switch Configuration
management PC.
D-Link Smart Managed Switch User Manual
for detailed instructions.
You can download
2 5
2 5
the DNA utility from