ABB IRBT 2005 Product Manual page 259

2
3
4
5
6
Product manual - IRBT 2005
3HAC051130-001 Revision: F
Action
Refit the brake release unit and strap the brake
release cables to the carriage.
Refit the covers.
Mark the cables with a paint pen on both sides
of the strapping.
DANGER
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in the section
cause injury or damage on page
Perform a test run before powering up the track
to full speed and duty cycle.
© Copyright 2015 - 2018 ABB. All rights reserved.
Illustration/Note
See Fitting covers on page
First test run may
24.
See Test run on page
4 Repair
4.9.3 Replacing the cables
Continued
89.
258.
259