Positioning The Stand - ABB IRBT 2005 Product Manual

2 Installation and commissioning

2.4.6 Positioning the stand

2.4.6 Positioning the stand
Positioning the stands
1
2
3
4
Continues on next page
92
Action
Position the sections in the intended work
site. If more than one section is used, as-
semble them as described in
the sections of the track motion IRBT 2005
(Longer than 9 m) on page
Adjust the horizontality of the IRBT 2005
with the M60 leveling screw using the lev-
eling tool (Art. No. 3HAC054535-001).
Make sure that all the leveling screws are
touching the floor.
Tighten the M60 fitting nuts using the nut
adjustment tool (Art. No. 3HAC054534-001).
© Copyright 2015 - 2018 ABB. All rights reserved.
Illustration/Note
Assembling
83.
xx1400001410
xx1400000463
A Leveling screw
xx1400000464
A Fitting nut
Product manual - IRBT 2005
3HAC051130-001 Revision: F