Table of Contents
Advertisement
4 Repair
4.6.3 Replacing the gear wheel
Continued
6
7
8
9
10
228
Action
Connect the lubrication tube connector of the
pinion.
Connect the cables from the tooling or robot
fitted on the carriage.
If necessary, remove the upper part of the
cable tray so that the connectors can pass
through.
Refit the bracket for brake release and secure
brake release cables with cable ties.
Refit the side cover of the carriage.
Refit the top cover.
© Copyright 2015 - 2018 ABB. All rights reserved.
Illustration/Note
xx1400001596
A Lubrication tube connector
xx1400001587
A M6x12 Screw DIN6921,
9ADA181-11 (4 pcs)
Product manual - IRBT 2005
3HAC051130-001 Revision: F
Advertisement
Table of Contents
