Storage - ABB IRBT 2005 Product Manual

2.3.2 Storage

Storing the cable chain
There are two methods for storing spare/not in use cable chains.
Method 1: folded in half
For complete chains with strapping in place and the strapping plates attached to
the chains, the chain can only be folded in half. The chain can either be folded so
that the chain is lying on itself or laid on its side.
xx1300000884
Method 2: rolled up
For complete chains with or without strapping in place or strapping in place and
the strapping plate not connected to the chain, the chain can be rolled up and
stored lying on its side.
xx1300000885
Product manual - IRBT 2005
3HAC051130-001 Revision: F
© Copyright 2015 - 2018 ABB. All rights reserved.
2 Installation and commissioning
Continues on next page
2.3.2 Storage
49