Table of Contents
Advertisement
2 Installation and commissioning
2.8.1 Replacing the grease cartridge in grease pump MEMOLUB
Continued
3
4
5
6
7
Continues on next page
142
Action
Remove the paper disc from the replacement
cartridge. Fill-in the required dates: "Started"
and "Replace before". The "replace before"
date is depending on the MEMOLUB
gram. Put the paper disc back in place in order
to see the instructions when the MEMOLUB
is closed.
Press softly on the cartridge until the grease
comes out, to avoid injecting air into the pump.
Place the cartridge at the inlet of the pump.
verify that the cartridge is correctly inserted in
the inlet of the pump.
Place the spring and the compression disc in-
side the transparent bell. Put the bell back in
place and verify that the compression disc is
correctly lying on the top of the cartridge sur-
face.
®
Close the MEMOLUB
as described before.
© Copyright 2015 - 2018 ABB. All rights reserved.
®
EPS
Illustration/Note
®
pro-
®
xx1400001574
xx1400001575
xx1400001577
xx1400001576
Product manual - IRBT 2005
3HAC051130-001 Revision: F
Advertisement
Table of Contents
