ABB IRBT 2005 Product Manual page 184

4 Repair
4.3 Replacing the ball bearing blocks
Continued
5
6
Refitting the ball bearing block
1
Continues on next page
184
Action
Remove the screws and washers.
Let the ball bearing block slide out of the
bracket and linear guide.
Action
Remove the standard screws delivered with
the block and replace with the grease pipe
fitting taken from the old block.
© Copyright 2015 - 2018 ABB. All rights reserved.
Illustration/Note
xx1400001701
A Ø17xØ11x2 Washer, 3HAB4233-1
(8 pcs)
B M10x30 Hex socket head cap screw,
3HAB3409-51 (8 pcs)
xx1400001702
Illustration/Note
Product manual - IRBT 2005
3HAC051130-001 Revision: F