Update Procedure; Updating Firmware - Toshiba e-STUDIO 5540C Service Manual

11.2.4

Update procedure

Important:
• The file system of a USB device should be formatted in the FAT or FAT32 format. USB
devices formatted in an NTFS or another format will not be able to be operated. The file
system of a USB device can be confirmed by opening its property using Windows Explorer or
such.
• Never shut down the equipment during an update. Otherwise, firmware data and the following
option data (if installed) could be damaged and may not be able to be operated properly.
- Data Overwrite Enabler (GP-1070)
- Meta Scan Enabler (GS-1010)
- External Interface Enabler (GS-1020)
- IPSec Enabler (GP-1080)
- Unicode Font Enabler (GS-1007) (e-STUDIO5560C/6560C/6570C only)
[A] Updating firmware
(1) Connect the USB device to the PC and write the model specific folder in which the data file is
stored.
Store the data file for updating in the model specific folder.
(2) Press the [ON/OFF] button on the control panel to shut down the equipment.
(3) Connect the USB device [1] to the USB port [2].
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
FIRMWARE UPDATING
[2]
[1]
Fig.11-9
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
11 - 12