Key in the date (acceptable values: 0-31) in "Notify Date 1" or "Notify Date 2" and press the [OK]
button.
•
Time setting ([CHANGE] button)
Pressing the [CHANGE] button sets the time at which you wand to send data.
This is the time when data are sent with "Day of the week", "Notify Date 1" and "Notify Date 2".
Key in the time (acceptable values: 00:00-23:59) in "Time".
Key in the time in the hour column of "Time", press the scroll button, key in the time in the minute
column of "Time".
After all the settings are completed, press the [OK] button. The display returns to the screen in
step (5).
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Fig.10-25
Fig.10-26
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
10 - 23
REMOTE SERVICE
10