External Counters; Signal; Pin Layout - Toshiba e-STUDIO 5540C Service Manual

13. EXTERNAL COUNTERS

13.1 Outline
This specification describes the interface between external counters, such as Coin Controller and Key
Counter.

13.2 Signal

Notes:
Regarding the output signals of MP6H1 or 2SC5712 (CTRON), use 24V supplied from the
equipment side as power.
13.2.1

Pin Layout

1. Connector on the LGC board: CN318 (JST-made B16B-CZWHK-B-1(LF)(SN)) (Coin Controller)
Pin
I/O Signal name
No.
A1 Power +24V
A2 Out CTRON
A3 In CTRCNT
A4 Out MCRUN
A5 Out EXTCTR
A6 GND PG
A7 Out BKCTR
A8 Out MNCTR
B1 Out FLCTR
B2 GND SG
B3 Out SIZE3
B4 Out SIZE2
B5 Out SIZE1
B6 Out SIZE0
B7 Power +5V (Sleep)
B8 In NC.
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
Function Voltage level
24V line DC24V+10%, -5%
Total Counter On Open Collector
Signal (MP6H1/2SC5712)
Copy permission L=0V, H=DC5V
Signal 1
Ready to Copy Open Collector
Signal (SN7407/UMH10NTN)
Exit Sensor On Open Collector
Signal (SN7407/UMH10NTN)
Power ground 0V
Black mode Open Collector
Counter Signal (SN7407/UMH10NTN)
Mono color mode Open Collector
Counter Signal (SN7407/UMH10NTN)
Full color mode Open Collector
Counter On Signal (SN7407/UMH10NTN)
Signal Ground 0V
Paper size Signal Open Collector
(SN7407/UMH10NTN)
Paper size Signal Open Collector
(SN7407/UMH10NTN)
Paper size Signal Open Collector
(SN7407/UMH10NTN)
Paper size Signal Open Collector
(SN7407/DTC123J)
5V line DC5V+5%, -4%
-
13 - 1
Remarks
When cover
opened:
OFF
L: ON
L: Allowed
L:
Operating
L: ON
L: ON
L: ON
L: ON
L: ON
L: ON
L: ON
L: ON
At the sleep
mode:OFF
-
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
GQ- GQ-
1200 1210
In use In use
In use In use
In use In use
In use In use
In use -
In use -
- In use
- In use
- In use
- In use
- In use
- In use
- In use
- In use
In use In use
- -
EXTERNAL COUNTERS
13